Commercial Model Ribbed Steel

Series 3250/51/52

3250 25 Gauge, Uninsulated

3251 25 Gauge, Insulated w/ Vinyl Back

3252 25 Gauge, Insulated w/ Steel Back

3240 24 Gauge, Uninsulated

3241 24 Gauge, Insulated w/ Vinyl Back

3242 24 Gauge, Insulated w/ Steel Back

3220 20 Gauge, Uninsulated

3221 20 Gauge, Insulated w/ Vinyl Back

3222 20 Gauge, Insulated w/ Steel Back

Insulated Door R-Value: 6.81*

• 2” thick sections constructed of pre-finished galvanized steel

• Insulated models feature either heavy duty vinyl or 27 gauge steel backers

• 3250/51/52 doors utilize steel that meets the nominal 24 ga. designation used by some door manufacturers

• Box shaped stiles are riveted to the face of the section and are galvanized for additional corrosion protection

• Tongue and groove meeting rails provide superior rail strength and weather resistance

• Glass is available in 1/8" DSB, 1/8" Lexan, Insulated or 1/4" tempered glass

• Glass is easily replaced or substituted by removing molded frames

• Exhaust port is optional for bottom section

• Track options include 2” or 3” bracket or clip angle mount and designed to accommodate virtually any headroom design requirements

• Heavy duty hardware may be specified with 11 or 14 gauge hinges and 10 ball rollers

• Bottom U-shaped astragal in an aluminum retainer is standard

• Increased windload requirements may be specified

• All models are available in finishing coat of white. Additional sandstone, brown and silver finishes are available in models 3240/41/42 ONLY

  *Calculated in accordance with ASHRAE standard formulas

  LIMITED WARRANTY Commercial Sectional Overhead Doors

  <<Top of page

Commercial Model 3285

Polystyrene Sandwich Doors

Model 3285 Polystyrene Sandwich Door
R-Value: 8.72*

• 26 gauge face and 27 gauge back steel are mechanically locked and bonded to a polystyrene core with urethane adhesive for maximum structural integrity

• Tongue and groove meeting rails provide superior joint strength and weather resistance

• Concealed hinge attachment plates run the full height of sections for superior strength

• Rigid exterior end stiles are finish painted white

• Glass is available in 1/8” float, 7/16” insulated or 1/4” tempered glass

• Glass is easily replaced or substituted by removing molded frames

• Exhaust port is optional for bottom section

• Track options include 2” or 3” bracket or clip angle mount and designed to accommodate virtually any headroom design requirements.

• Heavy duty hardware may be specified with 11 or 14 gauge hinges and 10 ball rollers

• Bottom U-shaped astragal is standard

• Increased windload requirements may be specified

• Available in finish coat colors of white, sandstone or brown

<<Top of page

Commercial Model 3212

All-Steel Thermally-Broken Carriage House Door

Model 3212 Thermally-Broken Insulated Steel Sandwich Door
R-Value: 14.3*

• Foamed-in-place polyurethane core permanently bonds the 20-gauge exterior and 27-gauge interior steel skins to form a rigid homogeneous section

• 2” thick sections are thermally broken to eliminate convection

• Tongue and groove meeting rails with joint gasketing provide superior joint strength and prevent air infiltration

• Concealed hinge attachment plates run the full height of sections for superior strength

• Rigid exterior end stiles are finish painted white

• Glass is available in 7/16” insulated or 1/4” tempered glass

• Glass is easily replaced or substituted by removing molded frames

• Exhaust port is optional for bottom section

• Track options include 2” or 3” bracket or clip angle mount and designed to accommodate virtually any headroom design requirements.

• Heavy duty hardware may be specified with 11 or 14-gauge hinges and 10 ball rollers

• Bottom U-shaped astragal is standard

• Increased windload requirements may be specified

• Available in finish coat color of white

• *Calculated in accordance with ASHRAE standard formulas

LIMITED WARRANTY Commercial Sectional Overhead Doors

<<Top of page

Commercial Model 3216

Polyurethane Thermal Doors

Model 3216 Polyurethane Thermal Door
R-Value: 14.3*

• Foamed-in-place polyurethane core permanently bonds the 26 gauge face and back steel to form a rigid homogeneous section

• 2” thick sections are thermally broken to eliminate convection

• Tongue and groove meeting rails with joint gasketing provide superior joint strength and prevent air infiltration

• Concealed hinge attachment plates run the full height of sections for superior strength

• Rigid exterior end stiles are finish painted white

• Glass is available in 7/16” insulated or 1/4” tempered glass

• Glass is easily replaced or substituted by removing molded frames

• Exhaust port is optional for bottom section

• Track options include 2” or 3” bracket or clip angle mount and designed to accommodate virtually any headroom design requirements.

• Heavy duty hardware may be specified with 11 or 14 gauge hinges and 10 ball rollers

• Bottom U-shaped astragal is standard

• Increased windload requirements may be specified

• Available in finish coat colors of white, brown, sandstone and almond

<<Top of page

Commercial Model 3290

Aluminum Full View Doors

Model 3290 Aluminum Full View Doors

• Clear anodized or white extruded aluminum construction

• Wide top rails, bottom rails and end stiles create additional perimeter strength

• Hidden through-bolt assembly insures maximum structural integrity

• Tongue and groove meeting rails provide superior joint strength and weather resistance

• Aluminum panels may be specified to create solid sections

• Glass is available in 1/8” float, 7/16” insulated or 1/4” tempered glass

• Glass is easily replaced or substituted by removing an inside vinyl strip

• Exhaust ports are optional for bottom section

• Track options include 2” or 3” bracket or clip angle mount and designed to accommodate virtually any headroom design requirements.

• Heavy duty hardware may be specified with 11 or 14 gauge hinges and 10 ball rollers

• Bottom U-shaped astragal is standard

<<Top of page